|
FLURO
Rod Ends and Spherical Plain Bearings are assembled machine parts to DIN ISO 12240 (formerly DIN 648), ready
for installation. They are used to guarantee the unproblematic movement between shaft and housing, especially
where the movement is not directly linear.
The FLURO production program consists of Spherical Plain Bearings in all Series (DIN ISO 12240-1) and Rod
Ends Series K and E (DIN ISO 12240-4), as well as Hydraulic Rod Ends with weld-on surface or female thread
fixable with hexagon socket head cap screws. As new products in this catalogue are Thrust Bearings and Angular
Contact Spherical Plain Bearings. To supplement the product range Angle Joints, Fork Heads, Locking Nuts and
Rubber Seals have been added.
Where bearings with standard dimensions cannot be used, parts to customer designs are manufactured. Alternatively
we can develop solutions for special applications. A small selection of these parts may be seen on the last
pages of this catalogue. Our premium trained engineering and quality guarantee staff is pleased to offer advise on
any application demand.
With high standard machinery we are able to turn, grind and mill parts with the highest precision. A list of our
machining capabilities is available on request.
We have been approved for quality assurance to DIN EN ISO 9001 since June 1997.
Download a PDF version of the FLURO catalog HERE
Ordering Details
| Female Thread: | The letter I is istuated in the second place in the reference
e.g. GI or EI |
| Male Thread: | The letter A is situated in the second place in the reference
e.g. GA or EA |
| Left Hand Thread: | The letter L is situated in the third place in the reference
e.g. GAL or EAL |
| Non-Standard Thread: | Bearing reference with additional thread specification
e.g. GISW 30, M 27x2 |
| Stainless Steel Ball: | The letter R will be added after size reference
e.g. GIRSW 10 R |
Completly Stainless
(Series K) | The letter RR will be added after size reference
e.g. GARSW 16 RR |
Completly Stainless
(Series E) | NIRO will be added after size reference
e.g. EI 16 D-NIRO |
| Hard Chrome Plated Ball: | IRC will be added after size reference
e.g. GASW 10 ICR |
| Seal: | -2RS will be added after size reference
e.g. GISW 10-2RS |
| Threaded Bolt: | Bo will be added after size reference
e.g. GISW 10 Bo |
| Nickel Plated Housing: | NI will be added after size reference
e.g. GISW 14 NI (improved corrosion resistance) |
| Special Grease Nipples: | SN will be added after size reference
e.g. GAS 16 SN DIN 71412 H1/A M6x1 |
|